Woodworking Tool Shop http://www.timberframe-tools.com/shop/ Woodworking Tool Shop RSS <![CDATA[Turning Basics for Furniture Makers - DVD]]>
Turning is unlike other woodworking processes because everything is happening at once. That's why it is better to watch than to read. It is the most effective way to learn new methods. With this video, discover how to master basics and beyond, so you can incorporate turning into your workshop skills.
* Parts for Furniture, Table Legs, Finials & More
* Tool Selection & Use
* Sharpening
* Cutting Coves, Beads & More
* Workholding Techniques
* Turning Tips & Tricks Author Steve Shanesy is Publisher and Editorial Director of Popular Woodworking and Woodworking Magazine. A 30-year furnituremaker.
Price=$24.95
Buy]]> Wed, 25 Aug 2010 10:53:33 -0400 http://www.timberframe-tools.com/shop/tools/books-and-video/turning.htm http://www.timberframe-tools.com/shop/tools/books-and-video/turning.htm <![CDATA[Spindle Gouges]]>
The spindle gouge is used to round stock initially and cut curved features. The thinner the spindle gouge, the finer the details it can cut. (caution: spindle gouges and bowl gouges are NOT interchangeable)
Price=$21.00
Buy]]> Wed, 25 Aug 2010 10:12:16 -0400 http://www.timberframe-tools.com/shop/tools/lathe-tools/spindle.htm http://www.timberframe-tools.com/shop/tools/lathe-tools/spindle.htm <![CDATA[Skew Chisels]]>
The skew chisel can perform a variety of pairing cuts and leave behind a smooth finish. Skew chisels come in either straight tang, oval tang, or with a slightly rounded bevel.
Price=$32.00
Buy]]> Wed, 25 Aug 2010 10:01:33 -0400 http://www.timberframe-tools.com/shop/tools/lathe-tools/skew.htm http://www.timberframe-tools.com/shop/tools/lathe-tools/skew.htm <![CDATA[Spokeshave - Stanley]]>
This adjustable blade spokeshave is made of durable malleable iron with two adjusting screws for vertical and lateral blade adjustments. The flat face trims flat and round stock while the curved face cuts a concave surface. Over lengths 10", blade widths 2". These are identical in design to the ones Stanley has been making for over 100 years. Honing required before use.
Price=$30.99
Buy]]> Tue, 03 Aug 2010 15:16:10 -0400 http://www.timberframe-tools.com/shop/tools/planes/spokeshave.htm http://www.timberframe-tools.com/shop/tools/planes/spokeshave.htm <![CDATA[Ceramic Stones]]>
Require no water or oil and no flattening on the finer grits.
Price=$48.99
Buy]]> Tue, 20 Jul 2010 14:26:25 -0400 http://www.timberframe-tools.com/shop/tools/sharpening/ceramic.htm http://www.timberframe-tools.com/shop/tools/sharpening/ceramic.htm <![CDATA[Diamond Stones]]>
These are sharp, can use either water or oil and do not require flattening. It will hone all materials including carbide.
Price=$34.99
Buy]]> Tue, 20 Jul 2010 14:22:11 -0400 http://www.timberframe-tools.com/shop/tools/sharpening/diamond.htm http://www.timberframe-tools.com/shop/tools/sharpening/diamond.htm <![CDATA[Water Stones]]>
Unlike man-made stones, water rather than oil is used on Japanese stones to prevent the surface from being clogged with metal particles. The coarse stones are 250, 800, 1000, and 1200 grit. The 250 and 800 grit are faster cutting and used for repairing nicked edges or reshaping a bevel. The 1000 or 1200 grit stones are used for the first stage of the actual sharpening to be followed by 4000 and perhaps 8000. Japanese water stones are softer than Western styles causing a fresh, sharp surface to be continually exposed to the tool edge but needing to be flattened regularly.
Price=$22.99
Buy]]> Tue, 20 Jul 2010 14:15:05 -0400 http://www.timberframe-tools.com/shop/tools/sharpening/water.htm http://www.timberframe-tools.com/shop/tools/sharpening/water.htm <![CDATA[Oil Stones]]>
Oil stones are a traditional approach to sharpening. They are quite stable and last a long time without need for constant flattening.
Price=$19.98
Buy]]> Tue, 20 Jul 2010 14:09:25 -0400 http://www.timberframe-tools.com/shop/tools/sharpening/oil-stones.htm http://www.timberframe-tools.com/shop/tools/sharpening/oil-stones.htm <![CDATA[Sharpening Roller Jig]]>
Sharpen and hone edge tools between grindings with this self-centering roller guide. * Chisels and plane irons from 1/16" to 2-5/8" wide can be held securely in one of the two sets of stepped jaws Beveled edge chisels work best. Registered or Mortising chisels may be too thick. * The accurately ground hardened steel roller glides across the surface of the stone to allow for a consistently fine edge * Complete instructions are included. Works with water stones, oils stones, diamond plates or sandpaper (scary sharp) systems.
Price=$12.99
Buy]]> Tue, 20 Jul 2010 14:03:13 -0400 http://www.timberframe-tools.com/shop/tools/sharpening/sharpening.htm http://www.timberframe-tools.com/shop/tools/sharpening/sharpening.htm <![CDATA[Headlamp - Energizer]]>
This headlamp is lightweight, adjustable vertically and has two white LED's that make it great for getting just a bit more light on those dovetail marks. Batteries last for a long time. It is just a really handy headlight to have in the workshop. It illuminates just where you need it, right where you are looking. Inexpensive, yet reliable. I have a few more expensive headlamps that cost much more, but I reach for this one because it is lighter and the light is better. I have on in my car, one in my shop, and a few others scattered around.
Price=$11.99
Buy]]> Mon, 12 Jul 2010 16:48:48 -0400 http://www.timberframe-tools.com/shop/tools/woodworking-safety/headlamp--.htm http://www.timberframe-tools.com/shop/tools/woodworking-safety/headlamp--.htm <![CDATA[Bifocal Safety Glasses - FastCap]]>
When 64ths seem to merge together on your rule but your vision is otherwise near normal, these bifocal magnifiers can improve accuracy dramatically. They provide uncorrected vision in the upper viewing field and correction for presbyopia (lacking ability to focus on nearby objects) in the reading section. Designed by a cabinetmaker with adjustable frames, anti-fog coated lenses, and a range of bifocal powers. Feature a Comfortable design with shatterproof wrap around lenses, UV protection and reinforced temples. ANSI rated Z87.1 * Bifocal Safety Glasses * Adjustable frames * Anti-fog coated lenses * Shatterproof wrap around lenses
Price=$7.99
Buy]]> Mon, 12 Jul 2010 16:39:57 -0400 http://www.timberframe-tools.com/shop/tools/woodworking-safety/bifocal.htm http://www.timberframe-tools.com/shop/tools/woodworking-safety/bifocal.htm <![CDATA[Pipe Clamp Saddles (4pk)- Jorgensen]]>
These saddles are extremely handy for creating jigs or other shop fixtures based on 3/4" pipe clamps. These simple fixtures keep your pipe clamps standing ready when both hands are busy. The saddles are drilled for semi-permanent mounting on jigs or clamp stations; a thumb screw locks them onto your pipe so they grip onto the pipe.
Price=$10.99
Buy]]> Sun, 27 Jun 2010 00:03:54 -0400 http://www.timberframe-tools.com/shop/tools/clamps/pipe-clamp.htm http://www.timberframe-tools.com/shop/tools/clamps/pipe-clamp.htm <![CDATA[Deeper Reach Pipe Clamp ]]>
This extra deep reach pipe clampis very handy for reaching places that ordinary pipe clamps can't. The big jaw clamps are made of heavy-duty ductile cast iron, feature a big 7" reach and have multiple-disc clutch plates for ease of adjustment and quick release. Screw mounts to any 3/4" standard threaded pipe. Includes clamp pads.
Price=$21.99
Buy]]> Sat, 26 Jun 2010 23:49:26 -0400 http://www.timberframe-tools.com/shop/tools/clamps/deeper.htm http://www.timberframe-tools.com/shop/tools/clamps/deeper.htm <![CDATA[Deep Reach Pipe Clamp - Jorgensen]]>
This American made Jorgensen Pony clamp has a deeper reach than ordinary pipe clamps. unlike ordinary pipe clamps, the clamp tail is fixed and the clamp head slides up and down the pipe so it is possible to reverse it and turn it into a large spreader. Create clamps of any length with this 2-1/2" deep-reach clamp head and your 3/4" black pipe (threaded on both ends). The sliding head operates smoothly with a 5/8" screw for final tightening while a multiple-disc clutch provides a secure grip on the pipe.
Price=$16.99
Buy]]> Sat, 26 Jun 2010 23:40:46 -0400 http://www.timberframe-tools.com/shop/tools/clamps/deep-reach.htm http://www.timberframe-tools.com/shop/tools/clamps/deep-reach.htm <![CDATA[The Woodwright's Guide - Roy Underhill]]>
Working Wood with Wedge and Edge This is a great book from someone that has been writing and talking old tools for a long time. His descriptions are clear and the line art drawings are a big change from the black and white photos in his other books. Roy magically weaves explanation of the tools, directions for use, and historical perspective into a fun and informative book.
Price=$15.30
Buy]]> Fri, 18 Jun 2010 14:49:01 -0400 http://www.timberframe-tools.com/shop/tools/books-and-video/the.htm http://www.timberframe-tools.com/shop/tools/books-and-video/the.htm <![CDATA[Daddy and Me - kid]]>
This lift-a-flap book by Karen Katz is for little kids (non-readers) is not specific to woodworking but does go through the simple steps of building a dog house. Measure, cut, hammer, paint. It is a cute book that my son enjoyed until nearly all the flaps were worn out. When he'd learn the name of a new tool in the workshop, I'd cut out a drawing one and paste it inside the cabinet in the book.
Price=$6.99
Buy]]> Fri, 18 Jun 2010 14:14:58 -0400 http://www.timberframe-tools.com/shop/tools/childrens-books-on-woodworking/daddy-and.htm http://www.timberframe-tools.com/shop/tools/childrens-books-on-woodworking/daddy-and.htm <![CDATA[Daddy, Can We Play in the Workshop?]]>
This book for kids and Dads is nice story about how having a child in the workshop causes a Dad to use grandpa's un-powered tools with his son. Black and white photos help tell the story.
Price=$9.94
Buy]]> Fri, 18 Jun 2010 14:04:42 -0400 http://www.timberframe-tools.com/shop/tools/childrens-books-on-woodworking/daddy-can.htm http://www.timberframe-tools.com/shop/tools/childrens-books-on-woodworking/daddy-can.htm <![CDATA[Large Crosscut Saw]]>
This 32" large crosscut saw is generally used for log home building or cutting large timberframing beams. It can also be used for bucking firewood.

Heavy duty hand hammered German blade with 3TPI. Teeth cut on both the push and the pull stroke. A handle can be added to the end to make it a short two-man saw.
Price=$76.98
Buy]]> Mon, 14 Jun 2010 14:30:25 -0400 http://www.timberframe-tools.com/shop/tools/hand-saws/bigsaw.htm http://www.timberframe-tools.com/shop/tools/hand-saws/bigsaw.htm <![CDATA[Scrub Plane - Lie Neilsen]]>
Scrub planes are used for dimensioning and flattening rough-sawn lumber. Thick shavings aggressively taken diagonally across the grain for maximum efficiency. Its narrow iron is ground convex for deep cuts without tearing at the edges, leaving scalloped surfaces ready for the Jack plane. 10-1/4" long, with cherry knob & handle. 1-1/2" wide iron is 3/16" thick.
Price=$165.00
Buy]]> Wed, 28 Apr 2010 15:12:17 -0400 http://www.timberframe-tools.com/shop/tools/planes/scrub-plane.htm http://www.timberframe-tools.com/shop/tools/planes/scrub-plane.htm <![CDATA[Scrub Plane - ECE]]>
A scrub plane is built for rough planing the high spots from a board by planing across the grain, prior to planing smooth. The convex shape of the cutter allows fast removal of stock. Plane is 9-1/2" long, with a 1-3/8" wide iron.

ECE hand planes combine Emmerich's meticulous quality with the economy of traditional hammer-set irons secured with wooden wedges. Heavy irons are solidly bedded for smooth, clean performance. Bodies are dense European beech and soles are long-wearing hornbeam. As in all Emmerich planes, the workmanship is simply outstanding.
Price=$99.00
Buy]]> Wed, 28 Apr 2010 15:07:36 -0400 http://www.timberframe-tools.com/shop/tools/planes/scrub.htm http://www.timberframe-tools.com/shop/tools/planes/scrub.htm <![CDATA[Rafter Square - Starrett]]>
Starrett tools high standards of quality show in this solid one-piece construction rafter square. The body is 24″ long by 2″ wide and the tongue is 16″ long by 1.5″ wide, and square with the body. Graduations of 1/8″ and 1/16″ are on the face side and 1/10″, 1/12″ and 1/16″ are on the back side. Black enamel finish with white printed graduations and information.
Price=$14.99
Buy]]> Wed, 21 Apr 2010 15:31:51 -0400 http://www.timberframe-tools.com/shop/tools/measuring/rafter.htm http://www.timberframe-tools.com/shop/tools/measuring/rafter.htm <![CDATA[7" Combination Square - Craftsman]]>
This size combination square is the perfect size to fit in a tool belt or shop apron and is great for checking mortise depths and tenon lenghts

Etched stainless steel blade provides maximum readability and performance, plus it resists rust and corrosion. Heavy-duty machined square head. Self-aligning draw-bolt, hardened scriber.
Lifetime Guarantee
Price=$7.99
Buy]]> Wed, 14 Apr 2010 16:49:50 -0400 http://www.timberframe-tools.com/shop/tools/measuring/7.htm http://www.timberframe-tools.com/shop/tools/measuring/7.htm <![CDATA[12" Combination Square - Craftsman]]>
This is the most common size for combination squares. They are handy for any woodworking project.

Craftsman 12 in. Combination Square has an Etched Stainless Steel Blade and precision ground edges and milled head.

Lifetime Guarantee
Price=$12.99
Buy]]> Wed, 14 Apr 2010 16:45:21 -0400 http://www.timberframe-tools.com/shop/tools/measuring/12.htm http://www.timberframe-tools.com/shop/tools/measuring/12.htm <![CDATA[16" Combination Square - Craftsman]]>
This is a great size combination square for outdoor construction projects and timber framing.

Stainless steel blade for lasting durability and heavy duty machined square head ensures accuracy. 16 in. blade spans wider boards and deep stamped graduations for easy reading.
Full view acrylic vial and self-aligning drawbolt Lifetime Guarantee
Price=$14.99
Buy]]> Wed, 14 Apr 2010 16:40:28 -0400 http://www.timberframe-tools.com/shop/tools/measuring/16combi-squ.htm http://www.timberframe-tools.com/shop/tools/measuring/16combi-squ.htm <![CDATA[Holdfast - small]]>
The long reach and large holding pad of this holdfast allow quick clamp or release of everything from small boards to large carving blocks. This method of clamping is perfect for projects that need frequent reorientation while planning, carving or working.
* Simply position the clamp in a 3/4" hole and give it a hard, solid hit with a mallet.
* To release, just hit the back side of the clamp.
* Heavy duty ductile iron head featuring a 3-1/2" throat, 5/8" round steel shank with an overall length of 8-1/4".

I suggest gluing a bit of leather to keep the pad from damaging your wood.
If you find the holdfast slips in the hole, roughen the shank with some 60grit sandpaper.
Price=$13.50
Buy]]> Tue, 09 Mar 2010 11:38:39 -0500 http://www.timberframe-tools.com/shop/tools/shop-accessories/holdfast--.htm http://www.timberframe-tools.com/shop/tools/shop-accessories/holdfast--.htm <![CDATA[Round-Over Bits - Freud]]>
These Round-Over Bits feature the revolutionary Quadra-Cut™ design which combines two small wings that cut downward to shear the top edge for a splinter-free surface, and two large wings that shear upward for a smooth finish.
* Soften furniture edges and create decorative beads
* Use on all composition materials, plywoods, hardwoods and softwoods
* Use with hand-held and table-mounted portable routers
Price=$32.99
Buy]]> Tue, 02 Mar 2010 15:50:49 -0500 http://www.timberframe-tools.com/shop/tools/router-bits/round-over.htm http://www.timberframe-tools.com/shop/tools/router-bits/round-over.htm <![CDATA[Scraper set (4) - Lynx]]>
The LYNX Cabinet Scraper Set when used on hardwood, will leave a smooth surface without the tedium and expense of sandpaper. Available in four different styles for flat, concave and convex shapes of varying radii. •Straight is 2-1/2" x 5" •Convex/concave is 2" x 6" •Goose neck is 2-7/8" x 4-5/8" •Double curved is 2-3/4" x 5-1/2" •Scrapers are made of properly tempered .80mm high quality steel
Price=$15.99
Buy]]> Fri, 26 Feb 2010 23:06:42 -0500 http://www.timberframe-tools.com/shop/tools/planes/scraper.htm http://www.timberframe-tools.com/shop/tools/planes/scraper.htm <![CDATA[Burnisher - Pfeil]]>
This hardened burnisher is manufactured from the highest grade steel, hardened to exacting specifications and polished to a mirror finish to reduce friction when rolling a hook. The oval version allow for the sharpening of radius scrapers as well as cards. Blade is approximately 3/8" by 6-1/4”. Overall length is 10-3/4”. Natural oil finished cherry handle.
Price=$25.99
Buy]]> Fri, 26 Feb 2010 22:43:59 -0500 http://www.timberframe-tools.com/shop/tools/sharpening/burnisher.htm http://www.timberframe-tools.com/shop/tools/sharpening/burnisher.htm <![CDATA[Adjustable Burnisher - Veritas]]>
Dial in your hook angle from 0° to 15° with this adjustable burnisher. Designed for use on straight scraper blades only, its precision-ground tungsten-carbide burnishing rod can be easily set to the desired angle with the brass dial and set screw. Ideal for selecting and maintaining proper angles for a variety of jobs. The molded body protects the burnished edge and keeps hands clear of sharp corners. Scraper included.


Price=$37.50
Buy]]> Fri, 26 Feb 2010 22:33:04 -0500 http://www.timberframe-tools.com/shop/tools/sharpening/adjustable.htm http://www.timberframe-tools.com/shop/tools/sharpening/adjustable.htm <![CDATA[Fine Kerf Dovetail Saw - Zona Tool]]>
This 24 TPI Deluxe Universal Razor Saw (35-560) is pretty amazing. It cuts crisp dovetails and leaves behind a nearly perfect finish. Cutting on the pull stroke makes it easy and precise. Will cut dovetails up to an inch deep.
Made in the USA.
This deluxe version has a better handle than the regular Zona saws. Fine Kerf Razor Saw has a blade with .010in. kerf, 6-1/2in. length, 1-3/16in. depth, and steel back for stability.

Cuts in balsa, soft wood,hard wood, plastic, copper or brass. Leaves smooth edges behind.
Price=$8.42
Buy]]> Wed, 27 Jan 2010 16:59:57 -0500 http://www.timberframe-tools.com/shop/tools/dovetail-saws/fine-kerf.htm http://www.timberframe-tools.com/shop/tools/dovetail-saws/fine-kerf.htm <![CDATA[Doweling jig 3/8 - Rockler]]>
This jig is simple, effective affordable and perfect.

This is a great doweling jig for woodworkers who want a quick joint without a lot of layout. Many doweling jigs require that you make a mark on the inside edge of the joint, meaning you either have to transfer marks from the face to the edge, or measure and mark with a tape measure. Since this jig is transparent, layout is much simpler. Just set the two parts together and strike a line across the center of the joint. The see-through reference lines allows you to line up the jig perfectly. Clamp it in place, drill and you�re done!
Price=$10.99
Buy]]> Sat, 23 Jan 2010 22:50:00 -0500 http://www.timberframe-tools.com/shop/tools/guides/dowelingjig.htm http://www.timberframe-tools.com/shop/tools/guides/dowelingjig.htm <![CDATA[Bench Dogs (4 pack) - Rockler]]>
I like these bench dogs. They are inexpensive, lower than most wood I work on (so I don't hit them with my plane) and they are plastic (if I do hit them with the plane, there is no damage to the blade.

Ideal for all workbenches that have 3/4'' dia. Holes. With low profile (7/16'') for working with 1/2'' thick material and up. Sold in packages of 4.
Price=$7.29
Buy]]> Sat, 23 Jan 2010 22:26:35 -0500 http://www.timberframe-tools.com/shop/tools/shop-accessories/bench-dogs.htm http://www.timberframe-tools.com/shop/tools/shop-accessories/bench-dogs.htm <![CDATA[Router Plane Large - Lie Nielsen]]>
A router plane is a great tool for working shallow mortises - hinge gains, inlay, door locks, trimming tenons and the like. This plane is loosely based on an early Stanley model, but with an improved depth stop and adjuster. Also, the blade is held solidly in the body in a square broached hole. The plane has a ductile iron body, 0-1 blade, 8 1/4" long x 3 1/2" wide x 3 3/4" tall, 1.65 lbs. 3/8" blade.
Price=$140.00
Buy]]> Fri, 22 Jan 2010 16:29:19 -0500 http://www.timberframe-tools.com/shop/tools/planes/large.htm http://www.timberframe-tools.com/shop/tools/planes/large.htm <![CDATA[Wonder Dog - Veritas]]>
Wonderfully useful accessories for any bench. Wonder Dogs mount in 3/4" drilled holes to provide the moving half of a standard bench dog system without the need for a tail vise, so (together with Veritas Round Bench Dogs, #019714) they're perfect for retro-fitting into heavy benches built without dogs. They can also be used in multi-directional, multi-dog holding systems (they pivot in any direction), shop-built wooden clamps, and custom holding or shaping jigs. Dog post is 4-3/8" high. A steel spring wire keeps it from slipping. The screw angles downward 2" for secure grip. The brass clamp face is 3/4" high; the post stands a minimum of 7/8" above the bench.
Price=$39.99
Buy]]> Fri, 22 Jan 2010 16:14:41 -0500 http://www.timberframe-tools.com/shop/tools/shop-accessories/wonder-dog.htm http://www.timberframe-tools.com/shop/tools/shop-accessories/wonder-dog.htm <![CDATA[Broad Axe - Ox-Head]]>
Broad axes are used for squaring and shaping logs and timbers. These broad axes use the Lower Bavarian Pattern and are particularly well suited to squaring timbers. The flat-sided head is chisel-sharpened with a single bevel, which makes flattening the side of a log as easy as it gets. The right hand model has the flat face on the left hand side of the axe so that you can chop flush on the right side of the workpiece. Has American hickory handle which is bent slightly so it will not interfere with your work.

The head is 2.2 lb with a 5-1/2" cutting edge and the handle is 15-3/4" long.
Price=$94.99
Buy]]> Fri, 22 Jan 2010 16:09:05 -0500 http://www.timberframe-tools.com/shop/tools/timber-framing/broad-axe.htm http://www.timberframe-tools.com/shop/tools/timber-framing/broad-axe.htm <![CDATA[Dovetail Template - Woodjoy]]>
The Dovetail Template is a truly pocket-sized jig that makes it easy to lay out both the slanted and square lines for dovetails at either 1:6 or 1:8 slopes. Black steel blade for angled layout will mark dovetails up to 1-3/8" deep; brass stock for marking square lines is 1-7/16" long.

I use this for laying out all of my dovetails. It is the easiest, most flexible and most reliable of the templates available.
Price=$25.99
Buy]]> Fri, 22 Jan 2010 16:03:35 -0500 http://www.timberframe-tools.com/shop/tools/measuring/dovetail.htm http://www.timberframe-tools.com/shop/tools/measuring/dovetail.htm <![CDATA[Saddle Square - Veritas]]>
When marking with a knife or pencil, layout lines can be transferred around a corner from one surface to another easily and precisely using an ordinary steel square. The 1-1/4" by 2-1/4" legs of this small aluminum square wrap right around 90 corners, letting you mark with a pencil nearly as precisely as with a knife. The large saddle square is 1-1/2" wide so the marks will fit nominal 2" lumber, and has a slot machined through the center to help lay out stud locations.

This square tipped on its side can also be an effective drill guide to make sure the is entering the wood square in both directions.
Price=$18.99
Buy]]> Fri, 22 Jan 2010 15:50:56 -0500 http://www.timberframe-tools.com/shop/tools/measuring/saddle.htm http://www.timberframe-tools.com/shop/tools/measuring/saddle.htm <![CDATA[Frame Saw]]>
A frame saw can be the goto saw for those wanting a quieter shop experience. It can do precision cuts as well as the kind of cutting that would send most woodworkers running for their table saws.

Combine the frame saw with a Japanese style blade (turbo cut)and you have a very effective saw.
Price=$44.99
Buy]]> Fri, 22 Jan 2010 15:43:54 -0500 http://www.timberframe-tools.com/shop/tools/hand-saws/frame-saw.htm http://www.timberframe-tools.com/shop/tools/hand-saws/frame-saw.htm <![CDATA[Log Saw - Anahiki]]>
Use the Japanese Anahiki Log Saw for unbelievably fast, powerful crosscutting or ripping in green or seasoned wood. Excellent for timber framing, or general construction. In the shop, the log saw will complete most rough cuts in less time than it would take to plug in your circular saw. 7 tpi blade. Thickness .029". Kerf .040". Blade is 14" long; overall length 30-1/2". Weighs 10-3/4 oz.
Price=$49.99
Buy]]> Fri, 22 Jan 2010 15:35:53 -0500 http://www.timberframe-tools.com/shop/tools/timber-framing/log-saw--.htm http://www.timberframe-tools.com/shop/tools/timber-framing/log-saw--.htm <![CDATA[Adze - Ox Head]]>
Used for rough dimensioning timbers, scaling bark from logs and jobs that require fast, powerful removal of lots of wood. The 3 1/4" wide blade is slightly curved to match the radius of your swing. 32" long; weighs 3 1/2 lbs. Made in Germany.
Price=$69.98
Buy]]> Fri, 22 Jan 2010 15:15:30 -0500 http://www.timberframe-tools.com/shop/tools/timber-framing/adze---ox.htm http://www.timberframe-tools.com/shop/tools/timber-framing/adze---ox.htm <![CDATA[Plane Blades (Irons) - Hock]]>
Hock makes some outstanding replacement irons (blades) for the most common planes in use today. The are thicker and hold an edge better than most irons.
Price=$31.99
Buy]]> Fri, 22 Jan 2010 15:11:27 -0500 http://www.timberframe-tools.com/shop/tools/planes/plane.htm http://www.timberframe-tools.com/shop/tools/planes/plane.htm <![CDATA[10 Bench Rabbet - Kamal]]>
This plane is similar to the Lie Nielsen but it lacks tilting handles (you will whack your knuckles repeatedly if you use this for cleaning up timberframing tenons) It also lacks the cross grain nickers for clean cross cutting. Fit and Finish are not comparable to the Lie-Nielsen, but neither is the price.

The No. 10 Bench Rabbet is nearly identical to a No. 5 Jack plane, but its sides are left open and the iron is shaped to cut flush with the side of the plane. It can create rabbets or raised panels from scratch, and it's very handy for planing flush to adjacent surfaces. Traditionally used for cutting lap joints on house siding, carriages and boats. 12-3/4" long, 2-11/16" wide iron.
Price=$89.99
Buy]]> Fri, 22 Jan 2010 15:04:44 -0500 http://www.timberframe-tools.com/shop/tools/planes/10-bench.htm http://www.timberframe-tools.com/shop/tools/planes/10-bench.htm <![CDATA[60 1/2 Rabbet Block Plane - Lie Nielsen]]>
This plane is not as useful in Timberframing as the Carriage maker's rabbet, but it is less expensive and much easier to fit in a toolbelt. It can be very handy for cleaning up tenons.

Lie-Nielsen's No. 60-1/2R Rabbet Block Plane is a low-angle (12°) block plane with open sides and an iron shaped for rabbeting and trimming joints to perfection. Iron and sole are 1-3/4" wide; total length is 6-1/4". The body is unbreakable ductile iron, and the lever cap is polished bronze. Weighs 1-3/4 lbs.
Price=$165.00
Buy]]> Fri, 22 Jan 2010 14:49:57 -0500 http://www.timberframe-tools.com/shop/tools/planes/60-1-2.htm http://www.timberframe-tools.com/shop/tools/planes/60-1-2.htm <![CDATA[Dowel-end Baller]]>
These unique tools round the end of dowels to a perfect hemisphere with just a few turns. The 3 piece set handles dowels of 1/2", 3/4" & 1" diameters. Use a slipstone or file stone to resharpen the quarter-round blade.

These are essentially planes for the end of round stock. They work well when needing to put a finished end on branches used in natural timber furniture.
Price=$24.99
Buy]]> Fri, 22 Jan 2010 14:43:00 -0500 http://www.timberframe-tools.com/shop/tools/planes/dowel-end.htm http://www.timberframe-tools.com/shop/tools/planes/dowel-end.htm <![CDATA[Dowel Rounders]]>
These pencil-sharpener-like tools shave the ends of dowels, spindles and square stock to perfect rounds. They're ideal for making round tenons, and for dimensioning stock for cutting wooden screw threads as well. Set of three produces cylinders in 1/2", 3/4" & 1" finished sizes.

These are handy for making natural timber and branch furniture.
Price=$24.99
Buy]]> Fri, 22 Jan 2010 14:40:04 -0500 http://www.timberframe-tools.com/shop/tools/joinery/dowel.htm http://www.timberframe-tools.com/shop/tools/joinery/dowel.htm <![CDATA[Mortise Chisels set of 3 - Narex]]>
These are affordable chisels with great handles and blades rated best value by Fine Woodworking. They are designed for furniture sized mortises, not building sized. Please note that they are metric widths (not a problem if you size the mortise to the width of the chisel).
Price=$39.99
Buy]]> Fri, 22 Jan 2010 14:34:32 -0500 http://www.timberframe-tools.com/shop/tools/chisels/mortise.htm http://www.timberframe-tools.com/shop/tools/chisels/mortise.htm <![CDATA[Bench Chisels - 6 piece Boxed Set - Narex]]>
These chisels were rated as the best value by Fine Woodworking. They hold a good edge and are cleanly shaped. The only drawback is that they are in metric widths (this is not a problem if you size your dovetails to the chisel).
Price=$59.99
Buy]]> Fri, 22 Jan 2010 14:24:56 -0500 http://www.timberframe-tools.com/shop/tools/chisels/narex.htm http://www.timberframe-tools.com/shop/tools/chisels/narex.htm <![CDATA[Saw Rasp]]>
A Shinto Saw Rasp is a unique tool for rapidly shaping wood. The saw blades are arranged so it does not clog like ordinary rasps are prone to do.
Price=$31.99
Buy]]> Sat, 16 Jan 2010 23:14:41 -0500 http://www.timberframe-tools.com/shop/tools/rasps-files/saw-rasp.htm http://www.timberframe-tools.com/shop/tools/rasps-files/saw-rasp.htm <![CDATA[Log Jaws for JawHorse - Rockwell]]>

The Log Jaw for the JawHorse adds some nice capabilities for holding logs and timbers. Care has to be used to not tighten the jaws too much and damage the exterior of the wood if that is a concern.



Price=$39.99
Buy]]> Thu, 10 Dec 2009 15:15:31 -0500 http://www.timberframe-tools.com/shop/tools/shop-accessories/log-jaws.htm http://www.timberframe-tools.com/shop/tools/shop-accessories/log-jaws.htm <![CDATA[Jaw Horse - Rockwell]]>
The JawHorse is an interesting and completely useful combination of a sawhorse and a bench vise.
Worth checking out if you've ever been frustrated when you just need an extra set of hands but nobody is around to help. (kids and spouses always seem to be off doing other stuff).


Price=$177.76
Buy]]> Thu, 10 Dec 2009 15:06:56 -0500 http://www.timberframe-tools.com/shop/tools/shop-accessories/jaw-horse.htm http://www.timberframe-tools.com/shop/tools/shop-accessories/jaw-horse.htm <![CDATA[Router Table - Bosch]]>
This benchtop router table is top of the class in terms of features and quality construction.

The Bosch RA1171 Cabinet-Style Router Table provides a premium work surface for woodworking and routing. Designed to fit a variety of routers and able to mount on any workbench, this router table is a versatile piece of equipment that will serve as an indispensable part of any woodworking shop. And with its cabinet-style construction, it offers better dust collection and noise reduction for a more efficient work environment.
Price=$189.94
Buy]]> Fri, 04 Dec 2009 22:53:59 -0500 http://www.timberframe-tools.com/shop/tools/routers/routerable.htm http://www.timberframe-tools.com/shop/tools/routers/routerable.htm <![CDATA[Flexible Curve Guide]]>
Flexible Curves let you draw a perfectly contoured curve without measuring and help in transferring curved designs from plans or originals. Just bend to any curve down to a 1" radius-they'll hold it, without springback, as long as you need it. Made with a lead core completely enclosed in flexible plastic. One side has a raised edge for inking.
Price=$10.99
Buy]]> Fri, 04 Dec 2009 16:05:18 -0500 http://www.timberframe-tools.com/shop/tools/measuring/flexible.htm http://www.timberframe-tools.com/shop/tools/measuring/flexible.htm <![CDATA[Pattern Cutting Bits]]>
Pattern cutting bits are very useful for making making a template and creating identical results in trimming a profile from that template.

Are the tools to use when working with template patterns. Now you can put your pattern on top of the wood and see your cut. The special bearing and stop collar assembly installed above the cutters allows you to move smoothly around the pattern. Or use it with a router table when the pattern is on the bottom of the wood you’re shaping. Carbide tipped, with two flutes, same diameter cutter and bearing.
Price=$19.98
Buy]]> Fri, 04 Dec 2009 15:57:41 -0500 http://www.timberframe-tools.com/shop/tools/router-bits/pattern.htm http://www.timberframe-tools.com/shop/tools/router-bits/pattern.htm <![CDATA[Spade Bits]]>
Spade bits can bore large holes fairly quickly. Careful though, the holes shouldn't overlap as it can cause the bit to catch and twist your arm. If you must drill overlapping holes it is safer to use a Forstner bit.

Irwin Industrial Tools 341008 8-Piece Speebor Blue Groove Pro Set Case . For fast, rough or clean and exact holes, Irwin's extensive line of woodboring drill bits provide the user with the best available tools for each application in achieving their wood drilling needs.
Price=$23.97
Buy]]> Fri, 04 Dec 2009 12:43:07 -0500 http://www.timberframe-tools.com/shop/tools/drill-bits/spade-bits.htm http://www.timberframe-tools.com/shop/tools/drill-bits/spade-bits.htm <![CDATA[Straight Bit]]>
A straight bit is used in a router to cut a channel with a flat bottom. These are great for cutting dados, hinge mortises, or grooves.

I find the 1/2" diameter to be one I use quite often.
Price=$15.00
Buy]]> Fri, 04 Dec 2009 12:35:12 -0500 http://www.timberframe-tools.com/shop/tools/router-bits/straight-bi.htm http://www.timberframe-tools.com/shop/tools/router-bits/straight-bi.htm <![CDATA[Depth Stop]]>
If you've ever had bad experiences with fitting the little metal depth stops on your drill bit and then watching it slide no matter how much you tighten the itty bitty allen screw, then it is time to make the switch to these.

Let you drill to an exact depth when roughing out mortises or pre-drilling screw holes. They fit all standard 1/16" to 1/2" drill bits. Made of high impact plastic, the collet-like stops hold tight with just a simple twist. Their bright color makes them easy to spot in your tool box.
Price=$5.99
Buy]]> Fri, 04 Dec 2009 12:27:08 -0500 http://www.timberframe-tools.com/shop/tools/drill-bits/depth-stop.htm http://www.timberframe-tools.com/shop/tools/drill-bits/depth-stop.htm <![CDATA[Brad Point Drill Bits]]>
These are the common workhorses of any drill. A large variety of sizes on hand will keep you from swearing.
Price=$1.99
Buy]]> Fri, 04 Dec 2009 12:22:31 -0500 http://www.timberframe-tools.com/shop/tools/drill-bits/brad-point.htm http://www.timberframe-tools.com/shop/tools/drill-bits/brad-point.htm <![CDATA[Forstner Bits]]>
Forstner bits bore clean holes with flat bottoms and include fairly large diameters. They are handy both in the shop, and on the timberframing job. In the shop you will need a variety of sizes, on the timber framing job you can get by with a 1" and 2" and be sure to buy an extension as you will need the extra length.
Price=$5.00
Buy]]> Fri, 04 Dec 2009 12:18:11 -0500 http://www.timberframe-tools.com/shop/tools/drill-bits/forstnerbit.htm http://www.timberframe-tools.com/shop/tools/drill-bits/forstnerbit.htm <![CDATA[Edge Guide - Porter Cable Router]]>
This is a finely made fully adjustable edge guide for most Porter Cable Routers.

The Port-Cable 42690 is an easy to use and accurate edge guide for Porter-Cable routers; designed for models 100, 690, 691, 693, 891, 892, and 893. This durable router accessory is built with an anodized, extruded aluminum body for extra strength and dual sliding, lockable mounts to allow for easy operation. Mounting hardware comes included.
Price=$40.00
Buy]]> Thu, 03 Dec 2009 16:35:09 -0500 http://www.timberframe-tools.com/shop/tools/routers/edge-guide.htm http://www.timberframe-tools.com/shop/tools/routers/edge-guide.htm <![CDATA[StrapPull (come-a-long)]]>
A strap pull is handy in timberframing to draw pieces tight or hold them together while they are being raised.

1-Ton Capacity, Professional Grade Power Pull, Maximum Lift 12', 2 To 1 Safety Factor, Features Precision-Cast Aluminum Alloy Ratchet Wheel, 1 Piece Construction, 3/16" Galvanized, Aircraft Quality Cable, Interlocking Precision Fit, Steel Alloy Pawls With Safety Spacer Sleeve, Cold Rolled, High Strength, Tempered Steel Frame & Handle, Drop Forged Steel Slip Hooks With OSHA Recommended Safety Latches, Heavy Gauge Steel, Reinforced Ratchet Guard, Aircraft Type, Heat Treated Bolts, High Tensile, Fully Rotating Steel Swivel, Trouble Free, "Notch-At-A-Time" Letdown, Permanent, Comfortable, Non-Slip Grip, Pow'R Pulls Are Used To Lift, Pull, Stretch, Or Tighten.
Price=$34.86
Buy]]> Thu, 03 Dec 2009 15:58:46 -0500 http://www.timberframe-tools.com/shop/tools/timber-framing/strappull.htm http://www.timberframe-tools.com/shop/tools/timber-framing/strappull.htm <![CDATA[Portable Drill Press Guide]]>
Handy for drilling straight or angled holes in a controlled manner. Perfect for anything that is too awkward to bring to your drill press.

You can drill any fixed angle from 45° to 90° and this jig allows you to drill round stock on center by using the integral Vee guides. Center edge drilling by using the anchor pins in the base for fences. Don't be limited by extra wide stock that won't fit your drill press, just chuck your electric drill to the 3/8" spindle to operate. A depth stop is provided for accurate boring and countersinking. Includes a three jaw 0-3/8" geared chuck.
Price=$43.50
Buy]]> Wed, 25 Nov 2009 13:33:05 -0500 http://www.timberframe-tools.com/shop/tools/drill-presses/portable.htm http://www.timberframe-tools.com/shop/tools/drill-presses/portable.htm <![CDATA[Rabbet Bit]]>
Rabbetting bits use a guide roller to control the depth of the rabbet. Some come with sets of different rollers so the depth can be adjusted.
Price=$36.00
Buy]]> Wed, 25 Nov 2009 13:13:34 -0500 http://www.timberframe-tools.com/shop/tools/router-bits/rabbet-bit.htm http://www.timberframe-tools.com/shop/tools/router-bits/rabbet-bit.htm <![CDATA[Gorilla Glue]]>
Gorilla Glue is the finest all purpose premium polyurethane wood glue available today. Gorilla Glue is environmentally friendly, incredibly strong, 100% waterproof, will not freeze, requires no mixing, does not become brittle with age, and will not expand or contract in the glue joint. You can even glue up oily exotics without the kind of surface preparation required by other glues. You only need to apply Gorilla Glue to one surface, so your glue lasts twice as long.
Price=$4.99
Buy]]> Wed, 25 Nov 2009 12:33:32 -0500 http://www.timberframe-tools.com/shop/tools/shop-accessories/gorilla.htm http://www.timberframe-tools.com/shop/tools/shop-accessories/gorilla.htm <![CDATA[Forstner Bit Extensions]]>
Forstner bits are very useful in the shop and in timberframing. The problem with using them in timberframing is they are not long enough for the mortise. Bit extensions are the easy and affordabel way around the problem. I find both the 4" and the 10" are extremely handy.

These extensions solve one of the major problems with Forstner Bits---their limited depth capacity. Each extension is 4" long and is sized for the appropriate bit shank diameter. Bits are securely held in place with two hex screws to hold the original bit shank.
Price=$6.99
Buy]]> Tue, 24 Nov 2009 23:41:03 -0500 http://www.timberframe-tools.com/shop/tools/drill-bits/forstner.htm http://www.timberframe-tools.com/shop/tools/drill-bits/forstner.htm <![CDATA[A Museum of Early American Tools]]>
A nice look at the history and use of old tools. Great illustrations make show the tools and the use.

Illustrates a huge variety of axes, hammers, chisels, etc.--each one perfectly suited to a specific task and carefully made to individual specifications.
Price=$13.57
Buy]]> Tue, 24 Nov 2009 23:34:29 -0500 http://www.timberframe-tools.com/shop/tools/books-and-video/a-museum.htm http://www.timberframe-tools.com/shop/tools/books-and-video/a-museum.htm <![CDATA[A Reverence for Wood]]>
This book has a nice bit of history and old timer knowledge of wood. A fun read with great drawings.

Refreshingly written, delightfully illustrated book remarks expansively on the resourcefulness of early Americans in their use of this valuable commodity — from the crafting of furniture, tools, and buildings to the use of such by-products as charcoal and medicine. "One of Sloane's best books." — Library Journal. 69 black-and-white illustrations.
Price=$9.94
Buy]]> Tue, 24 Nov 2009 23:31:53 -0500 http://www.timberframe-tools.com/shop/tools/books-and-video/a.htm http://www.timberframe-tools.com/shop/tools/books-and-video/a.htm <![CDATA[Timber Frame Construction: All About Post and Beam Building]]>
by Jack Sobon and Roger Schroeder. This book is a great introduction to timber frame methods, examples and tools. If I could only get one reference, this would be the one.

"A sprightly manual on post-and-beam building techniques, well-illustrated with sketches and photos." -- Popular Science
Price=$13.57
Buy]]> Tue, 24 Nov 2009 23:30:03 -0500 http://www.timberframe-tools.com/shop/tools/books-and-video/timberbook.htm http://www.timberframe-tools.com/shop/tools/books-and-video/timberbook.htm <![CDATA[A Timber Framer's Workshop: Joinery, Design & Construction of Traditional Timber Frames]]>
Has some great 3-d renderings of common joints. Gets into a little more of the physics of the wood and the joints.

Timber Framing has been a part of our building culture and an inspiration to mankind since the Middle Ages. As we enter a new millenium, it is designed to remain as one of building's most enduring forms, not only because of its intrinsic beauty, but because it is a pure and complete structural system.
Price=$19.80
Buy]]> Tue, 24 Nov 2009 23:27:13 -0500 http://www.timberframe-tools.com/shop/tools/books-and-video/a-timber.htm http://www.timberframe-tools.com/shop/tools/books-and-video/a-timber.htm <![CDATA[Restoring Tuning and Using Classic Woodworking Tools]]>
A great book for those who get bitten by the old tool bug. I am glad I got mine before it went out of print.

“A good book for beginners, but it also contains a lot of valuable and interesting information for the seasoned classic-tool user....A good addition to your library.”—Fine Woodworking. “Dunbar...shows how to purchase, restore, and use a variety of antique tools, including several types of planes.”—Library Journal.
Price=$40.00
Buy]]> Tue, 24 Nov 2009 23:24:33 -0500 http://www.timberframe-tools.com/shop/tools/books-and-video/restoring.htm http://www.timberframe-tools.com/shop/tools/books-and-video/restoring.htm <![CDATA[Diary of an Early American Boy - Eric Sloan]]>
This book started me on this path. It is a neat little story of how things were done and has a lot of great drawings of tools and use of timbers and wood.

This reprint of an actual early-19th-century diary provides today's readers with an engaging rarity: a 15-year-old's brief, concise notebook and Sloane's 72 drawings and explanatory narrative. "An extraordinary glimpse into everyday Early American rural life . . . will delight readers of all ages." — History in Review.
Price=$9.99
Buy]]> Tue, 24 Nov 2009 23:21:34 -0500 http://www.timberframe-tools.com/shop/tools/books-and-video/diary-of.htm http://www.timberframe-tools.com/shop/tools/books-and-video/diary-of.htm <![CDATA[Broad Hatchet -Vaughn]]>
Single beveled like it is supposed to be for making pegs or roughing out and other timberframing tasks.

This hewing hatchet is for fast rough shaping, dimensioning and smoothing of wood. One face is ground flat to the cutting edge, so it can be swung flush along a surface. For right-handed use, convertible to left-hand by remounting the head on a new handle. Blade is 4-1/2"; length is 15-1/2". 2-1/2 lbs.
Price=$35.99
Buy]]> Tue, 24 Nov 2009 23:16:36 -0500 http://www.timberframe-tools.com/shop/tools/timber-framing/broad.htm http://www.timberframe-tools.com/shop/tools/timber-framing/broad.htm <![CDATA[10lb Dead blow sledge hammer]]>
Not quite a timberframing commander but pretty close and very handy to have around.

Essential dead-blow hammer in hard-to-find 10 lb, 42" sledge hammer size*Durable ABS head allows heavy blows without metal-on-metal, metal-on-wood damage*Lead-pellet center absorbs energy, prevents dangerous bounce-back; non-sparking*36" stainless steel tube handle with contoured and ridged soft-grip for non-slip hold
Price=$43.87
Buy]]> Tue, 24 Nov 2009 23:08:28 -0500 http://www.timberframe-tools.com/shop/tools/hammers-n-mallets/10lb-dead.htm http://www.timberframe-tools.com/shop/tools/hammers-n-mallets/10lb-dead.htm <![CDATA[Dead Blow Hammer - 2lb]]>
This is the same deadblow hammer sold as a Craftsman at Sears. I used this for my entire timberframing project. It held up well in all the construction and the handle makes it not slip out of tired hands.

Dead blow counteracts the tendency to bounce back Soft face won't damage the surface Non-slip fiberglass handle Made in the U.S.A. Lifetime warranty
Price=$32.74
Buy]]> Tue, 24 Nov 2009 23:04:33 -0500 http://www.timberframe-tools.com/shop/tools/hammers-n-mallets/dead-blow.htm http://www.timberframe-tools.com/shop/tools/hammers-n-mallets/dead-blow.htm <![CDATA[Wood threading ]]>
These are very handy for cutting threads onto a dowel and cutting matching threads on a hole. I found the 3/4" version to have the most uses for the scale of timber framing.

This threadbox and tap, for cutting external and internal threads in wood, is useful for making clamps, jigs, fixtures, knockdown furniture, toys, and novelties. Although traditional in design, modern technology and metallurgical advances have improved the traditional threadbox and tap and perfected its components.
* Hardwood threadbox with turned handles has an aluminum insert to prevent wear and extend the tool life.
* Steel tap is machined to close tolerances and designed to allow easy chip clearance.
* The resulting wood thread is both tight fitting and strong.
* Available in five sizes.
* Includes threadbox, regular tap and instructions.


Bottoming Taps are for cutting threads to the bottom of a blind hole. Use them after a regular tap has gone as far as it can in your hole. (Bottoming taps sold separately.)

Price=$36.99
Buy]]> Tue, 24 Nov 2009 22:44:17 -0500 http://www.timberframe-tools.com/shop/tools/joinery/wood.htm http://www.timberframe-tools.com/shop/tools/joinery/wood.htm <![CDATA[Stanley Fat Max Sawhorses]]>
I own 4 of these and have used and abused them and they just keep working great. By putting 2x4
Price=$58.90
Buy]]> Tue, 24 Nov 2009 22:28:32 -0500 http://www.timberframe-tools.com/shop/tools/shop-accessories/sawhorse.htm http://www.timberframe-tools.com/shop/tools/shop-accessories/sawhorse.htm <![CDATA[Chain Mortiser - Makita 7104L 12 Amp]]>
This is the tool to have if you are going to do more than just small timberframing. What it saves you in time would make the cost a non-issue. Drooooool :)

Perfect for the timber framing and log home industries, this innovative power tool notches and/or cuts through-holes in thick wood stock quickly, neatly and accurately. Extremely portable with its built-in carrying handle and 37.4 lb weight. The powerful 12amp motor can easily handle any size job and the externally accessible brushes makes service quick and easy. Equipped with a standard 23/32" (18.25mm) Cutter Chain, you can max cut up to 12-1/8" wide and 6-1/8" deep. Five additional Cutter Chain widths, from 5/8" to 15/16", are also available (Optional). Expect the best and get it with Makita Power Tools.
Price=$1305.50
Buy]]> Tue, 24 Nov 2009 22:17:59 -0500 http://www.timberframe-tools.com/shop/tools/timber-framing/chain.htm http://www.timberframe-tools.com/shop/tools/timber-framing/chain.htm <![CDATA[Power Tenon Cutters - Veritas]]>
These cut round tenons on the end or branches, logs or stock lumber. They are handy not so much for timberframing directly, but for creating accents that go along with a timber frame (railings, furniture...).

For anyone building rustic furniture, the Veritas aluminum-body tenon cutters will cut smooth, perfect tenons with radiused shoulders. Cutters are designed to run vibration free while being driven by an electric drill, yet still yield the same accuracy when used with a hand brace. The anodized body has been balanced to eliminate vibration and an integral level vial makes in-line cutting more accurate. To increase safety, the back end of the blade is contoured to avoid anything extending beyond the revolving aluminum body. The body has a built-in honing guide for easy sharpening of blades on a drill-press mounted drum sander. The blade is adjustable to cut the exact size of tenon required in both dry and green wood. Available in eight cutting diameters. Sizes 5/8" to 1" cut 2-3/4" long tenons and are typically used for most rustic furniture. Sizes 1-1/4" to 2" will cut 4-1/4" long tenons and are used for larger structural connections, such as bed frame to post, or fence rail to post. All sizes have hex shanks; sizes 5/8" to 1" are for use in an electric drill with a 3/8" (or larger) chuck. Sizes 1-1/4" to 2", which require more torque to drive, are for use in larger electric drills with a 1/2" (or larger) chuck. Not for use in a drill press.
Price=$89.99
Buy]]> Tue, 24 Nov 2009 22:14:28 -0500 http://www.timberframe-tools.com/shop/tools/timber-framing/power.htm http://www.timberframe-tools.com/shop/tools/timber-framing/power.htm <![CDATA[3-1/4" Power Plane - Bosch]]>
Handy and fast to use without the extra expense of the much wider Makita.

This well-designed planer offers fast stock removal and the smoothest finish--exactly what we expected from Bosch. The powerful 6.5 amp motor runs the versatile two-blade Woodrazor system at 16,500 rpm with a protective shield that covers the section of blade that's not in use. The fence itself deserves applause--bevels are accurate and easy to adjust. We love the chip ejection as well. Too many times, we've tried tools with an exhaust system that might as well not be there, but this one actually moves the removed stock and it's multidirectional! Deep cuts are possible in just one pass without bogging or chatter. There's even a spring-loaded park rest stand that protects blade and workpiece.
Price=$167.88
Buy]]> Tue, 24 Nov 2009 22:08:53 -0500 http://www.timberframe-tools.com/shop/tools/planes/3-1-4.htm http://www.timberframe-tools.com/shop/tools/planes/3-1-4.htm <![CDATA[6-3/4" Power Plane - Makita]]>
Drool :) This is twice the width of other power planers. It is the only one that is really sized appropriately for timberframing.

Unrivaled for sheer power, size and performance, this planer does the job for you! Powerful 10.9 Amps Makita motor lets the blade make 30,000 cuts per minute. For continuous operation, simply click the lock-on button. Cutting Width (in.): 6 3/4, Cuts Per Minute (CPM): 30,000, Rated RPM: 15,000, Amps: 10.9, Case Included
Price=$632.37
Buy]]> Tue, 24 Nov 2009 22:04:42 -0500 http://www.timberframe-tools.com/shop/tools/planes/6-3-4.htm http://www.timberframe-tools.com/shop/tools/planes/6-3-4.htm <![CDATA[1/2" 18V Lithium Drill - Makita BDF452HW]]>
I own this drill and am very pleased with it. It is comfortable to use, has plenty of power and was the Fine Woodworking's top pick for 18V Cordless Drill's for both 2008 and 2009.

* Makita-built 4-pole motor delivers 450 in.lbs. of Max Torque, with a variable 2-speed all metal transmission (0-400 / 0-1, 500 RPM) for a wide range of applications * Compact, ergonomic design; only 8-Inch long and weighs just 3.5-Pound * Built-in L.E.D. light illuminates the work area * Makita LXT lithium-ion battery and energy star rated 15-Minute rapid optimum charger produces 430-Percent total lifetime work with 2.5X more cycles * 3-Year warranty on tool; 1-Year warranty on battery and charger
Price=$177.30
Buy]]> Tue, 24 Nov 2009 22:01:00 -0500 http://www.timberframe-tools.com/shop/tools/drills/1-2-18v.htm http://www.timberframe-tools.com/shop/tools/drills/1-2-18v.htm <![CDATA[1/2" Hammer Drill - Bosch 119VSRK]]>
A really well designed hammer drill.

Packing 8.5 amps of torque power, the Bosch 1/2" Dual Torque Hammer Drill will plough through any masonry that comes its way. Its compact and ergonomic design feels good in hand for less operator fatigue. A dual mode selector easily converts from rotation to hammer-drill mode. A two-speed gearbox (0-1,100/0-3,000 rpm, and 0-18,000/0-48,000 bpm) lets you adjust the speed and torque for a variety of applications. With a unique cord turret that pivots 35 degrees, you’ll have more freedom to move around. A rotating brush plate provides equal power in forward and reverse, and an integral slip clutch helps minimize wrist-torque. This kit includes 360-degree handle, depth gauge, and case.
Price=$139.94
Buy]]> Tue, 24 Nov 2009 21:56:01 -0500 http://www.timberframe-tools.com/shop/tools/drills/1-2-hammer.htm http://www.timberframe-tools.com/shop/tools/drills/1-2-hammer.htm <![CDATA[1/2" Drill - Dewalt Heavy Duty]]>
The DeWalt DW235G Heavy Duty 7.8 Amp 1/2-inch drill comes with helical-cut steel construction and heat-treated gears for increased durability and long gear life. A metal gear housing is included for jobsite durability and increased reliability, as is a 2-finger trigger for increased comfort. Also featured is a 360-degree side handle for greater control and versatility. This drill is capable of a no-load speed of 0-to-850 RPM and a maximum output of 600 watts. Weighing in at 4.2 pounds, this drill comes backed by a 3-year manufacturer's warranty. This drill comes with a chuck key with holder and a 360-degree side handle.
Price=$97.95
Buy]]> Tue, 24 Nov 2009 21:52:31 -0500 http://www.timberframe-tools.com/shop/tools/drills/1-2-drill.htm http://www.timberframe-tools.com/shop/tools/drills/1-2-drill.htm <![CDATA[18 Lithium Drill and Imact Driver]]>
I own this set and really like it. Plenty of power, compact design and a super fast charger. Even when doing heavy boring on a timber, by the time the first battery is dead, the second battery is fully re-charged.

Combo kit offers best power-to-weight ratio for both driver-drill and impact driver. * 1/2 Driver-Drill delivers 450 in. lbs. of efficient torque in a compact size and weighs only 3.5 lbs. * Impact Driver provides 1,280 in. lbs. of maximum torque and weighs only 2.8 lbs.
Price=$249.95
Buy]]> Tue, 24 Nov 2009 21:47:58 -0500 http://www.timberframe-tools.com/shop/tools/drills/18-lithium.htm http://www.timberframe-tools.com/shop/tools/drills/18-lithium.htm <![CDATA[Prazi PR2000 Beam Cutter for Direct Drive Circular Saws]]>
AN effective and lower cost alternative to buying a 16" circular saw for timberframing.

Prazi USA PR2000 Beam Cutter for 7-1/4-Inch Direct Drive Saws cut angles up to 45 degrees. The vertical foot-plate and built-in sight allow smooth, exact square cuts and ensures gliding manageability while cutting perfectly straight lines. With a 12-inch cutting capacity, you can professionally execute the following cuts and many more: rafter pitch cut, miters, stairs, arches, log cuts, compound angles, bandsaw cut, notch 6-by-12 panels and ripping.
Price=$164.99
Buy]]> Tue, 24 Nov 2009 21:42:36 -0500 http://www.timberframe-tools.com/shop/tools/power-saws/prazi-2.htm http://www.timberframe-tools.com/shop/tools/power-saws/prazi-2.htm <![CDATA[Prazi PR7000 Beam Cutter for Worm Drive Saws]]>
This converts any wormdrive saw into an accurate chain cutter beam saw complete with riving knife for timberframing. Probably not as safe to handle as the 16" circular saw, but much more affordable.

The Prazi USA PR7000 Beam Cutter (for 7-1/4-Inch Worm Drive Saws) cuts angles up to 45 degrees. The vertical foot-plate and built-in sight allow smooth, exact square cuts and ensures gliding manageability while cutting perfectly straight lines. With a 12 in. cutting capacity, you can professionally execute the following cuts and many more: rafter pitch cut, miters, stairs, arches, log cuts, compound angles, bandsaw cut, notch 6x12 panels and ripping. Fits Skil models 77 and 5860; Makita model 5077B; Milwaukee models 6377 and 6378; Black & Decker models 2700, 2710 and 3051; Craftsman model 2761; and DeWalt model DW377. Does not work with the DeWalt model DW378G.
Price=$157.65
Buy]]> Tue, 24 Nov 2009 21:35:18 -0500 http://www.timberframe-tools.com/shop/tools/power-saws/prazi.htm http://www.timberframe-tools.com/shop/tools/power-saws/prazi.htm <![CDATA[16" Circular Saw - Makita]]>
A drool tool for Timber Framing. Save lots of time cutting beams.

16-5/16" Circular Saw With Electric Brake, Large Capacity For Beam & Timber Cutting, Blade Cuts 6-1/4" At 90 Degrees & 4-3/16" At 45 Degrees, Weighs Only 28.7 LBS For Ease Of Operation, Electric Brake For Maximum Productivity, Powerful Motor Delivers 1,800 Maximum Watts Out, Low Noise At Only 87db, Includes: Carbide Tipped Blade & Rip Fence.
A must have for large scale timberframing.
Price=$655.50
Buy]]> Tue, 24 Nov 2009 21:18:44 -0500 http://www.timberframe-tools.com/shop/tools/power-saws/16.htm http://www.timberframe-tools.com/shop/tools/power-saws/16.htm <![CDATA[Duplex Rabbet Plane - Groz]]>
A very handy plane. Faster to set up than a router and more fun to use and safer than a using a dado cutter on teh table saw to make rabbets. Patterned after the Stanley 78 this plane can be used to make rabbets with or across the grain.
* Round nicker (cutting spur) for scoring the grain ahead of the blade in cross grain cuts * 3/32" thick blade is lever adjusted in the rabbet position, and can be repositioned on the front end of the plane for bullnose work * Adjustable depth stop can be positioned for up to 1/2" depth of cut, and the single post fence can be installed on either side * 1-1/2" wide blade, 8-1/2" sole, 10" overall length
Price=$71.98
Buy]]> Tue, 24 Nov 2009 16:16:08 -0500 http://www.timberframe-tools.com/shop/tools/planes/duplex.htm http://www.timberframe-tools.com/shop/tools/planes/duplex.htm <![CDATA[10-1/4 Rabbet Plane - Lie Nielsen]]>
This plane is really the perfect tool for cleaning up tenons, shoulders and even haunches.

For those unfamiliar with it, the blade goes right up to both edges of the plane so it can cut flush. It also had retractable cross grain knickers to pre-cut the path of a cross grain rabbet or wide dado. The handles tilt so that you can use it without whacking your knuckles on the timber. There is NO substitute
Price=$375.00
Buy]]> Tue, 24 Nov 2009 16:11:44 -0500 http://www.timberframe-tools.com/shop/tools/planes/rabbet.htm http://www.timberframe-tools.com/shop/tools/planes/rabbet.htm <![CDATA[10-1/4 Bench Rabbet Plane - Lie Nielsen]]>
Some people may scoff that I put this plane in as a Timber Framing Tool. It is not a mistake on my part. This plane is really the perfect tool for cleaning up tenons, shoulders and even haunches.

For those unfamiliar with it, the blade goes right up to both edges of the plane so it can cut flush. It also had retractable cross grain knickers to pre-cut the path of a cross grain rabbet or wide dado. The handles tilt so that you can use it without whacking your knuckles on the timber. There are pre-war Stanley's out there that are well made, but the tilting handles are often broken and there were NO cross grain knickers, so in this case I highly recommend going right to this tool as a new purchase. I'd buy this one again in a heartbeat for my next timber framing project. It is well worth the price and way better than any "power tool." I consider it an essential timber framing tool.
Price=$375.00
Buy]]> Tue, 24 Nov 2009 16:06:22 -0500 http://www.timberframe-tools.com/shop/tools/timber-framing/10-1-4.htm http://www.timberframe-tools.com/shop/tools/timber-framing/10-1-4.htm <![CDATA[Froe]]>
Used by colonial settlers to split shingles, shakes, and lumber for homes in early America. The shingle froe is still a primary tool in many traditional woodworking projects which require riving, like Windsor chair spindles and spoons. * Simply pound the blade of the froe into the end of a short log with a mallet or maul. * Then pull back on the handle to split off a slice of the wood with the grain. * Handle is 18" long. * Blade is 15" long and 2" deep. * Roughly finished. * Made in the USA.
Price=$49.99
Buy]]> Tue, 24 Nov 2009 15:51:28 -0500 http://www.timberframe-tools.com/shop/tools/timber-framing/froe.htm http://www.timberframe-tools.com/shop/tools/timber-framing/froe.htm <![CDATA[Carpenter's Hatchet - Grandfors]]>
• This hatchet has a straight edge and thin blade with low angle of the bevel face, suited for work in dry wood. • The forged inward curve from the heel to the lip of the head allows your hand to grip almost straight above the center of the edge. • This, and the long straight cutting edge, gives rigidity, stability, and control when cutting. •The axe poll is ground and can be used as a hammer. •The head weighs 1-1/2 lb •A 3-1/2" face •18" hickory handle •Comes with grain-leather sheath. A good axe is useful rapidly making pegs and other large scale carving.
Price=$110.00
Buy]]> Tue, 24 Nov 2009 15:47:16 -0500 http://www.timberframe-tools.com/shop/tools/timber-framing/carpenter.htm http://www.timberframe-tools.com/shop/tools/timber-framing/carpenter.htm <![CDATA[Adze - Pfeil]]>
Perfect for those large carving or timber framing projects and feature the same attention to detail and high quality as our world famous "Swiss Made" carving tools. Premium tool steel is hardened to 56-58 Rc to create a durable, resilient cutting edge, which stays sharp longer. All tools feature "through eye" forging and come handled, ready for use. Solid ash handles are unfinished.
Price=$109.00
Buy]]> Tue, 24 Nov 2009 15:42:25 -0500 http://www.timberframe-tools.com/shop/tools/timber-framing/adze--.htm http://www.timberframe-tools.com/shop/tools/timber-framing/adze--.htm <![CDATA[Drawknife]]>
Not an essential tool for the basics of timber framing, but it is handy for shaping a corner brace to be more pleasing to the eye. A great tool for removing a lot of material in a hurry, but also gentle enough to leave a nice finished surface.
Price=$69.99
Buy]]> Tue, 24 Nov 2009 12:34:44 -0500 http://www.timberframe-tools.com/shop/tools/planes/drawknife.htm http://www.timberframe-tools.com/shop/tools/planes/drawknife.htm <![CDATA[Building the Timber Frame House by Tedd Benson]]>
The author shows the first-time builder illustrations of how to design the structure, layout, and cut joints, and finally drive them home on raising day. The professional will find the beam-design formulas and hard-to-find beam design load charts for oak, fir, spruce, and pine an great reference. 211 pg softcover
Price=$20.00
Buy]]> Tue, 24 Nov 2009 12:30:04 -0500 http://www.timberframe-tools.com/shop/tools/books-and-video/building.htm http://www.timberframe-tools.com/shop/tools/books-and-video/building.htm <![CDATA[Firmer Chisels]]>
With longer blades (7" to 8") and sturdy handles these chisels are well suited to timber framing and you may even find you reach for them sometimes for finer work as well. The socket handles are a real plus.
Price=$99.00
Buy]]> Tue, 24 Nov 2009 12:25:40 -0500 http://www.timberframe-tools.com/shop/tools/chisels/firmer.htm http://www.timberframe-tools.com/shop/tools/chisels/firmer.htm <![CDATA[Slicks for Timber Framing]]>
A slick is a wide long chisel that is used more like a plane than a chisel. It is effective at paring down a tenon or shoulder and I've used them effectively for trimming the angles of a bird's mouth rafter seat.
Price=$49.99
Buy]]> Tue, 24 Nov 2009 12:19:22 -0500 http://www.timberframe-tools.com/shop/tools/chisels/slicks-for.htm http://www.timberframe-tools.com/shop/tools/chisels/slicks-for.htm <![CDATA[2" Timber Framers Chisel]]>
A popular timber framing socket chisel and combined it with a rugged canvas holster especially made to protect it. Holster is reinforced with a thick cotton webbing liner and extra tip pad to prevent cutting through.
Price=$134.99
Buy]]> Tue, 24 Nov 2009 12:14:17 -0500 http://www.timberframe-tools.com/shop/tools/chisels/2-timber.htm http://www.timberframe-tools.com/shop/tools/chisels/2-timber.htm <![CDATA[Corner Chisel]]>
This 3/8" chisel by Sorby is a bit undersized for dedicated timber framing, but it will work where it is needed in the corner of most mortises with the added benefit of being able to be used for smaller work as well.
Price=$71.98
Buy]]> Tue, 24 Nov 2009 12:07:40 -0500 http://www.timberframe-tools.com/shop/tools/chisels/corner.htm http://www.timberframe-tools.com/shop/tools/chisels/corner.htm <![CDATA[Drill Press (radial) - Laguna]]>
This Drill press has the unique ability to have a variable length from center. Motor: 1/2 HP TFEC RPM: 5 Speeds (550 - 3,470) Table: 12" Dia. Swiveling and Tilting Chucks: 1/2" Keyed Chuck Travel: 3 1/2" Head Travel: 11" Front to Back Head Tilt: +90 to -45 Degrees Radial Height: 64" Weight: 150 lbs.
Price=$363.00
Buy]]> Fri, 13 Nov 2009 23:21:02 -0500 http://www.timberframe-tools.com/shop/tools/drill-presses/drill.htm http://www.timberframe-tools.com/shop/tools/drill-presses/drill.htm <![CDATA[Hollow Chisel Mortiser - Laguna]]>
This mortiser is very powerful and is an effective addition for anyone that intends to do a lot of mortise and tenon joinery.
Price=$396.00
Buy]]> Fri, 13 Nov 2009 23:08:52 -0500 http://www.timberframe-tools.com/shop/tools/joinery/hollow.htm http://www.timberframe-tools.com/shop/tools/joinery/hollow.htm